-
This
keyless entry system consists of a keyboard and a console. The
keyboard sends a coded signal from outside the garage. The console
fastens to an inside garage wall. It receives the 4-digit
programmed coded signal and starts the door opener.
-
10,000
possible combinations. Code can be changed easily if desired.
-
The user
has 10 seconds from the time the first number is pressed to enter
the 4-digit code.
-
If
incorrect numbers are accidentally pressed, a 5 second interval is
necessary before staring over.
-
Operates
from the garage door opener power with a battery back-up for code
memory and lighted keyboard. Unit will not operate without
battery.
-
Simple to
install in 5 easy steps.
-
Provides
an additional push button control to operate door from inside
garage.
-
The garage
door can be operated after a valid code entry by pressing ANY
single key AS LONG AS THE KEYBOARD LIGHT REMAINS ON.
-
Keyboard
illuminates and remains lit for 10 seconds when ANY number is
pressed. In darkness this feature allows user to press ANY number
before entering the 4-digit code.
-
IMPORTANT: Some garage door openers have a third screw
terminal which supplies power to the radio control. This terminal
can be connected to terminal No. 3 on the console with a third
strand of bell wire (not supplied).
-
With
ANY garage door opener made by Stanley, accessory Transformer
95LM must be installed.
- Lighted Keyboard and Flip-Up cover.
- Battery, Wire, Mounting Clips and
Instructions included.
