Features Include:

• Remote Light - This light can be mounted anywhere on the ceiling in the garage.

• Power Lock - A deadbolt lock is activated by the opener each time the door is opened or closed.

• Cable Tension Monitor - Uniquely designed to monitor cable tension and help eliminate cable slips off the drum.

• Adaptive Force Setting - Senses changes to the door and will automatically adjust the force to temperature fluctuations, floor height & door track movement.

• Patented Absolute Positioning Technology - This new design will allow electronic limits to be extremely accurate even after a power outage or where power is removed for an extended period of time, such as in new construction.

• Powerful 24v DC Motor - Provides ultra-quiet slow start/slow stop for smooth operation.

Accessories Included:

• 1 - Motion detecting control panel.

• 1 - Remote light.

• 1 - 3-button Burled Walnut Security+® remote control.

Options and Accessories:

• Evercharge™ Battery Backup System -  model 475LM (available below) will open the door even when power is out. NO more getting locked out of the house!

• New Wireless Control Panel -  model 378LM (available below) great for when a second control panel is needed.

• Additional remote lights- model 380LM (available below) available for when more light is needed in the garage.

• Additional Remote Controls- model 370LM, 371LM, 372LM, 373LM, 374LM.

• Compatible Keyless Entry - model 377LM.

• 6-foot power cord making connecting to a power source easier.

• Quick-connect terminals are push-in wiring for quicker installation.

• The Smart Garage Door Opener® - Lets you program additional remotes or a keyless entry from the motion-detecting control panel or the power head.

• Wall mount Installation - Mounts on the left or right side of the garage door. NO rails to hang. Simply mounts on the wall and attaches to the garage door torsion bar. Must be within 6' of electrical outlet.

Security and Safety Features:

• Power Lock - Similar to a deadbolt, it ensures a door cannot be forced open once it goes down.

• Manual release handle in case of power failure to release  door for manual operation.

• The Protector System projects an invisible light beam across the garage opening. If beam is broken while door is closing, the opener will reverse. Door will not close if beam is obstructed.

• HomeLink®  compatible, the in-vehicle universal remote control.

Standard Specifications:

• Garage Door Opener Dimensions: 6.85"D x 16.25'H x 6.01"W.

• Maximum Door Size: Up to 14' High, Total of 180 square feet.

• Maximum Door Weight: 650 lbs.

• Travel Rate: Approximately 7.6" /Second.

• Headroom Clearance Required: 3" from Center of Torsion Bar.

*See Below for Planning Tips*

There is a 30% ($130.00) re-stocking fee if this item is returned for ANY reason. If the item is opened, used, or missing parts, an additional re-stocking fee will be applied. If you experience installation trouble, or require technical assistance you may contact us or the Manufacturer.

Ships UPS Ground ONLY. Choose our standard Priority mail shipping ($6.95) when ordering on-line. NOT available for Express delivery. Manual shipping adjustments and charges will occur if more than one (1) is ordered online. Alaska, Hawaii, Puerto Rico, US Virgin Islands, Guam, Canada, and all international customers MUST call (219/395-9389) or e-mail for shipping costs.

380LM LiftMaster Jackshaft Garage Door Opener Remote Light

• Remote Light works just like a traditional garage door opener light.
• Can be positioned anywhere on the garage ceiling within 6' of an electrical outlet.
• For use with LiftMaster 3800 Jackshaft Garage Door Opener ONLY.

378LM LiftMaster Garage Door Opener Wireless Secondary Wall Control Panel

• Wireless wall control compatible with all 315 MHz garage door openers.
• Specifically designed for customers who want an extra control panel in the garage.
• Can be installed anywhere in the garage.
• Auxiliary button can be programmed to open and close a second 315 MHz garage door opener.
• This will NOT work with 390 MHz garage door openers.
• Batteries included.
• This wall control is not meant to be a substitute for a wired wall control panel because:
• Remotes cannot be programmed from this unit.
• Garage door cannot be opened if battery dies.
• Light button must be programmed by a wired multi-function wall control panel.
• There is no lock feature to lock out remote controls.
• No constant LED - cannot be seen in the dark.
• There is no constant pressure to override the safety sensor in an emergency.

CLICK HERE FOR CODING INSTRUCTIONS

LiftMaster Garage Door Opener Smart Control Panel™ 398LM

• This control panel is for use with all LiftMaster Series 3000 and 1300 garage door openers ONLY. They must be 315 MHz.

• Backlit screen always lit with soft-glow blue LED light.

• New on-board programming capability makes programming remote controls easier.

• Screen alternates between time and inside garage temperature, and bottom scroll message displays garage door opener diagnostics.

• Displays temperature in Fahrenheit or Celsius.

• Motion detector automatically turns on garage door lights when movement is sensed.

• On/Off switch for deactivation of motion-detecting function.

• Manual light control button.

• Locks out all outside remote controls signals while you're away.

• Choose from English, Spanish or French.

475LM LiftMaster Garage Door Opener EverCharge™ Battery Backup System

• For use with the LiftMaster 3800 Jackshaft Garage Door Opener and Estate Series Models 2500, 2500B, 2500D & 3500 ONLY.

• Always charged and ready, the EverCharge™ powers the garage door opener to open and close the garage door up to 20 full cycles when the power goes out.

• Audible signal sounds when door is moving under battery power.
• Bright LED lights let you know that the EverCharge™ is operable, when it is in use, or when the batteries need to be replaced.
• All safety and security features still operate.

• Simple to install. It sits on top of and plugs right into the back the opener. For low headroom installations, the EverCharge™ can also be mounted to a joist/rafter on the ceiling.

• This item ships UPS Ground ONLY.
• It is NOT available for Express Shipping. Please choose our standard priority mail shipping option when ordering on-line.

**** Note: Shipping costs may vary according to the respecting shipping weight, destination, cost of items and insurance of the package. Manual adjustment of shipping cost may be necessary in these situations.

Planning

Survey your garage area to see if any of the conditions below apply to your installation.  Additional materials may be required.  You may find it helpful to refer back to this page as you proceed with the installation of your opener.   

Depending on your requirements, there are several installation steps which may call for materials or hardware not included in the carton.

 THIS OPENER IS COMPATIBLE WITH: 

• Doors that use a torsion bar, springs, and a door no more than 14’ (4.2 m) high.

• 4”–6” (10 cm – 15 cm) drums, not to be used on tapered drums over 6” (15cm).

• High lift and standard lift sectional doors up to 14’ (4.2 cm) high.

• Doors up to 18’ wide

• Doors up to 180 sq. ft.

• 1” (2.5 cm) torsion bar only

• Review or inspect proposed installation area.  Opener can be installed on left or right side of door.  Select the side that meets the requirements listed below.

  • Must have minimum of 2 – ˝” (6.4 cm) between the garage wall and the center of the torsion bar.

  • Must have minimum of 3” (7/6 cm) between the ceiling and the center of torsion bar.

  • Must have minimum of 8” (20.3 cm) between the side garage wall (or obstruction) and the end of torsion bar.

  • The torsion bar must extend at least 1” to 5” (2.5 cm to 12 cm) past the bearing plate.

  • An electric outlet is required within 6” (1.8 m) of the installation area.  If outlet does not exist, contact an qualified electrician.

  • Depending upon garage construction, extension brackets or wood blocks may be needed to install safety reversing sensors.

  • Alternate floor mounting of the safety reversing sensors will require hardware not provided.

  • A model 475LM EverCharge Battery Backup System is strongly recommended if there is no access door to the garage, as this opener cannot be used in conjunction with an external emergency release mechanism.

  • Any gap between the floor and the bottom of the door must not exceed  Ľ” (6mm).  Otherwise the safety reversal system may not work properly.

NOTE:  Inspect the torsion bar while the door is raised and lowered.  It is important that there is no noticeable movement up and down or let and right.  If this type of movement is not corrected, lift of this opener will be greatly reduced.